| S / N | pangalan ng Produkto | laki | S / N | pangalan ng Produkto | laki |
| 1 | Template para sa Pag-unlad | 41 | Compression Bolt | ||
| 2 | I-reset si Rod | 42 | Panlabas na Manggas | 12/8 | |
| 3 | Inlet Guide Pipe | 43 | Drill Sleeve | 8/4.3 | |
| 4 | Handle ng Passage | 44 | Para makipagpalitan | 4.3 | |
| 5 | Cellular Positioner | 45 | I-lock ang Nail Detector | ||
| 6 | Thread Head Guide Wire | 46 | Detector | 4.5 | |
| 7 | Near-End Hollow Drill | 47 | Mahabang Drill Bit | 4.3 | |
| 8 | Hollow Hole Opener | 48 | Mag-drill Bit | 4.3 | |
| 9 | Quick Change Handle | 49 | Lock Nail Wrench | T25 | |
| 10 | Adaptor | 50 | Lock Nail Wrench Lever | T25 | |
| 11 | Soft Reamer Bar | 51 | Layunin ang pagkonekta ng bloke | Kaliwa | |
| 12 | Malambot Muling pagsiklab | 8.5 | 52 | Layunin ang pagkonekta ng bloke | karapatan |
| 13 | Soft Reamer | 9 | 53 | Guide Bar | 340 ~ 420 |
| 14 | Soft Reamer | 9.5 | 54 | Sleeve ng Dowel Rod | |
| 15 | Soft Reamer | 10 | 55 | Iposisyon ang Rod Drill Sleeve | |
| 16 | Soft Reamer | 10.5 | 56 | Para makipagpalitan | 6 |
| 17 | Soft Reamer | 11 | 57 | Flat Head Drill Bit | 6 |
| 18 | Soft Reamer | 11.5 | 58 | Mag-drill Bit | 6 |
| 19 | Soft Reamer | 12 | 59 | Hakbang Drill Bit | 3.4/6.0 |
| 20 | Soft Reamer | 12.5 | 60 | L-shaped Scraper | |
| 21 | Soft Reamer | 13 | 61 | Adjustable Posisyon Lever | |
| 22 | Hard Reamer | 62 | Dowel Lever | 9 | |
| 23 | Guide Wire Holder | 63 | Dowel Lever | 10 | |
| 24 | Ball Head Guide Wire | 64 | Posisyon Rod | 11 ~ 12 | |
| 25 | Wrench ng Ball Handle | 65 | Posisyon Clamp | ||
| 26 | Pagkonekta ng Bolt | 66 | Pantulong na Dowel Lever Holder | ||
| 27 | Kamay mahigpit na pagkakahawak | 67 | Pantulong na Posisyon Rod Hold Rod | ||
| 28 | Open-end Wrench | 68 | Pantulong na Posisyon Rod Inner Core | ||
| 29 | Maliit na Wrench | 69 | Pantulong na Posisyon Lever | 9 | |
| 30 | Universal Wrench para sa bolt | 70 | Pantulong na Posisyon Lever | 10 | |
| 31 | Drayber | 71 | Pantulong na Posisyon Rod | 11 ~ 12 | |
| 32 | Slide Hammer Guide Bar | 72 | Distal Sight Frame | ||
| 33 | Sliding Hammer | 73 | Dynamic na Hole Sight Frame | ||
| 34 | Frame ng Near-End Sight | 74 | Pansamantalang Dowel | ||
| 35 | Panlabas na Manggas | 11.5/8.5 | 75 | Tail Cap Hollow Wrench | |
| 36 | Tube ng Gabay | 8.5/3.2 | 76 | Guide Pin na may Hook | |
| 37 | Para makipagpalitan | 3.2 | 77 | Lag Bolt | |
| 38 | Gabay sa Needle Detector | 78 | Universal Ball Head Wrench | ||
| 39 | Near-End Limit Step Drill | ||||
| 40 | Uri ng AO Quick-change Handle |
